Candela GPro Machine Handpiece Connector Board is a brand-new replacement electronic connector board identified by part number 7111-10-2510 and reference code CACN2811 D63 for selected compatible Candela Gentle Pro laser systems.
This component is associated with the machine-side handpiece connection arrangement used in certain professional laser delivery configurations.
The board is referenced for selected 6–18 mm laser delivery systems, but exact compatibility depends on the machine model, installed delivery assembly, and electronic connection requirements.
Levant Technology supplies new laser spare parts, electronic control components, and professional aesthetic equipment accessories in the UAE.
This listing is for the identified replacement connector board. It is not a complete laser handpiece, optical fiber, delivery system, or main control board.
Candela GPro Machine Handpiece Connector Board is an electronic component associated with the connection between a compatible laser machine and its handpiece delivery arrangement.
Professional laser systems use specific electrical and mechanical interfaces to connect their different assemblies.
The correct connector board must match the equipment’s intended design and the existing component’s specifications.
A board with a similar appearance may have a different connector layout, revision, or electrical configuration.
For this reason, replacement selection should be based on the part identification and equipment documentation rather than the machine name alone.
The principal identifiers provided for this replacement component are:
Part Number: 7111-10-2510
This is the part number stated for the product listing and should be compared with the existing component and applicable service information.
Reference Code: CACN2811
This is an additional identification reference associated with the connector board.
Identifier: D63
D63 provides another reference detail that may help distinguish the required board.
Before ordering, customers should compare all three identifiers with the existing component.
The references help identify the product but do not independently guarantee compatibility with every Candela laser system.
An important characteristic of Candela GPro Machine Handpiece Connector Board is its association with the machine-side handpiece interface.
The handpiece connection arrangement can involve connectors, circuit boards, wiring, optical delivery components, and related assemblies.
Each element must be compatible with the installed equipment configuration.
The connector board should not be confused with a handpiece trigger, optical fiber, handpiece body, or another machine control board.
If the required replacement is unclear, a qualified technician should identify the defective or missing component before an order is placed.
The CACN2811 D63 reference is associated with selected configurations within the Candela Gentle Pro equipment family.
Potentially relevant machine families include:
These names are equipment-family references, not a guarantee of compatibility with every model or revision.
Different machines may have different handpiece arrangements, electronic connections, or delivery-system versions.
Compatibility must be confirmed using the exact equipment model, existing board part number, and applicable technical documentation.
The product description identifies an association with selected 6–18 mm delivery system configurations.
These measurements relate to laser treatment spot-size ranges, rather than the physical dimensions of the electronic board.
The reference does not mean that the product includes handpieces, distance gauges, lenses, or other spot-size accessories.
It also does not guarantee compatibility with every delivery system operating within this size range.
Buyers should verify the installed handpiece configuration and required connector-board reference before selecting the replacement.
Electronic connector boards form part of a laser machine’s internal connection arrangement.
A suitable replacement must match the intended electrical and physical interfaces.
Installing an unsuitable board may create additional faults or prevent the equipment from operating as intended.
Before replacing Candela GPro Machine Handpiece Connector Board, a qualified service technician should confirm that this specific component is required.
The technician should compare the old and new boards using the part identification, connector layout, mounting arrangement, and service documentation.
A new connector board does not guarantee that every handpiece fault will be resolved.
Handpiece-related faults can have several possible causes.
Depending on the symptoms and machine configuration, a technician may need to inspect:
A connection warning or operating problem does not prove that the connector board itself is defective.
Proper technical diagnosis should come before component replacement.
Before purchasing Candela GPro Machine Handpiece Connector Board, confirm:
Clear photographs of the existing board, its markings, and the relevant machine information can help with product identification.
The Candela GPro Machine Handpiece Connector Board offered by Levant Technology is Brand New.
Its new condition does not automatically establish manufacturer certification, original-equipment status, or universal compatibility.
Customers should verify the actual board reference, revision, supplied quantity, and any applicable warranty information before ordering.
The replacement board should be inspected for visible damage and checked against the existing part before installation.
Electronic boards require appropriate handling during inspection and installation.
Incorrect electrical connections, contamination, electrostatic discharge, or unsuitable installation procedures may damage electronic components.
Replacement should be performed by a qualified laser service technician following the applicable manufacturer service instructions.
Before installation, the technician should:
Do not modify the board or force incompatible connections to make the component fit.
The connector board forms part of professional laser equipment containing electrical, optical, and other safety-related systems.
Inspection and servicing require appropriate technical knowledge and equipment.
A machine with an unresolved handpiece, electrical, or safety fault should not return to clinical operation before the issue has been assessed and the relevant checks completed.
A replacement board does not replace necessary system maintenance, fault diagnosis, or testing.
What is Candela GPro Machine Handpiece Connector Board?
It is a brand-new electronic connector board associated with the machine-side handpiece interface of selected Candela Gentle Pro laser systems.
What is the part number?
The listed part number is 7111-10-2510.
What does CACN2811 D63 identify?
CACN2811 is the reference code, and D63 is an additional identifier for the replacement component.
Is Candela GPro Machine Handpiece Connector Board new or used?
The component is listed as Brand New.
Is it a complete laser handpiece?
No. This listing concerns an electronic connector board, not a complete handpiece or optical delivery system.
Which laser machines is the board associated with?
The reference is associated with selected GentleMax Pro, GentleLase Pro, and GentleYAG Pro configurations. Exact compatibility must be verified.
Does it support every 6–18 mm delivery system?
No. The spot-size range is a delivery-system reference, not a universal compatibility guarantee.
Can replacing the board resolve a handpiece connection error?
It may be an appropriate replacement when the board is confirmed faulty, but other components can also cause connection problems.
Is this the main CPU board?
No. It is listed as a handpiece connector board rather than a complete main control or CPU board.
Who should install the connector board?
Installation should be performed by a qualified laser service technician.
How can I confirm compatibility before ordering?
Send Levant Technology your machine model, existing board reference, delivery-system details, and clear photographs.
Levant Technology supplies new laser spare parts, electronic connector boards, handpiece accessories, and replacement components for professional aesthetic equipment in the UAE.
For Candela GPro Machine Handpiece Connector Board enquiries, contact our team to confirm availability of part 7111-10-2510, reference CACN2811 D63, supplied quantity, and compatibility with your installed laser delivery system.
Explore our laser spare parts collection for additional Candela-compatible electronic boards, handpiece components, and professional laser accessories.
Levant Technology helps clinics and qualified service technicians identify replacement parts using machine models, component references, and technical requirements.
Please verify part number 7111-10-2510, reference CACN2811 D63, board revision, electrical connections, delivery-system compatibility, and package quantity before ordering or installing this component.
Need a replacement handpiece connector board? Contact us today on WhatsApp for pricing and availability.
AED 30,00
AED 650,00
AED 28,00
AED 5.000,00