Handpiece Bubble Sensor Board Mini Series is a specialized replacement PCB for compatible Candela Mini GentleLase (MGL) and Mini GentleYAG (MGY) laser handpieces. Associated with bubble detection and handpiece monitoring, this component supports professional laser equipment maintenance. Available from Levant Technology UAE.
AED 800,00
100 in stock
Handpiece Bubble Sensor Board Mini Series is a specialized replacement electronic board associated with compatible Candela Mini GentleLase (MGL) and Mini GentleYAG (MGY) laser handpiece systems. This professional laser spare part is used within the handpiece sensing and monitoring arrangement, supporting the detection of bubble-related conditions in the corresponding equipment configuration.
Designed for professional laser equipment servicing, the Handpiece Bubble Sensor Board Mini Series provides a practical replacement option for technicians maintaining Candela Mini Series laser handpieces.
Levant Technology supplies laser electronic boards, handpiece accessories, optical components, and professional aesthetic equipment spare parts in the UAE.
Handpiece Bubble Sensor Board Mini Series is a replacement PCB associated with the sensing electronics of selected Candela Mini laser handpieces.
Professional aesthetic laser systems use different electronic components to monitor operating conditions and communicate information between the handpiece and the machine.
The bubble sensor board is associated with a specific monitoring function within the compatible handpiece arrangement.
Depending on the equipment version, related boards may also participate in identifying the installed treatment spot-size configuration.
This component is not a complete laser handpiece, optical fiber, cooling machine, or laser treatment device.
It is a specialized electronic spare part intended for maintenance of compatible professional laser equipment.
Specialized Handpiece Electronics
The board is associated with sensing and monitoring functions within compatible Candela Mini laser handpieces.
Supports Professional Laser Maintenance
A matching replacement board can be used when the existing sensor PCB has been identified for replacement during technical servicing.
Relevant to Mini GentleLase and Mini GentleYAG
The component category is associated with selected Candela Mini Series laser equipment configurations.
Focused Electronic Replacement
Replacing the affected PCB may be a practical maintenance solution when the fault is isolated to the corresponding handpiece electronics.
Useful for Aesthetic Clinics and Service Technicians
The component supports spare-part requirements for professionals maintaining Candela laser equipment.
The Candela Mini Series includes professional aesthetic laser platforms used for laser hair reduction and selected dermatological applications.
Candela Mini GentleLase (MGL)
Mini GentleLase is associated with 755nm Alexandrite laser technology.
The equipment uses specialized handpiece and electronic components as part of its professional treatment delivery system.
Candela Mini GentleYAG (MGY)
Mini GentleYAG is associated with 1064nm Nd laser technology.
Its handpiece assembly also relies on compatible electronic accessories and sensing components.
The Handpiece Bubble Sensor Board Mini Series is associated with replacement applications in these equipment families.
The correct board configuration depends on the installed handpiece and its electronic design.
Professional laser delivery systems can include monitoring components associated with their cooling and handpiece arrangements.
A bubble sensor system is intended to detect specified bubble-related conditions according to the equipment’s internal design.
The sensor board forms part of the electronic system responsible for processing or communicating the corresponding detection information.
The exact sensing method and signal functions depend on the installed board and equipment configuration.
This is why the Handpiece Bubble Sensor Board Mini Series should be identified by its actual laser handpiece application rather than described as a universal sensor for unrelated medical or laboratory devices.
Some related Candela Mini handpiece electronic boards are described as supporting both bubble-related monitoring and treatment spot-size recognition.
In professional laser equipment, the treatment spot size is an important parameter associated with the installed handpiece and optical delivery arrangement.
A compatible sensing board may participate in communicating relevant handpiece information to the laser system.
These functions depend on the specific PCB design and machine configuration.
The Handpiece Bubble Sensor Board Mini Series is therefore a specialized electronic component rather than an ordinary standalone air-bubble detection module.
Candela Mini laser handpieces can contain different electronic components with distinct functions.
Handpiece Bubble Sensor Board
Associated with bubble-related detection and monitoring within the compatible handpiece system.
Handpiece Slider Sensor Board
Associated with recognition or monitoring of the installed optical slider or spot-size arrangement.
Depending on the specific electronics, some handpiece boards may combine or coordinate more than one sensing function.
However, separate boards should not be considered interchangeable simply because they belong to the same machine family.
Levant Technology can assist with identifying the appropriate component for the existing handpiece.
Electronic components may require inspection or replacement during professional laser servicing.
A technician may investigate the handpiece sensor board when diagnosing issues such as:
The complete handpiece and associated systems should be assessed to identify the source of the issue.
When the installed board is confirmed to be faulty, a matching replacement can form part of the repair.
Laser handpiece electronic boards can differ by part number, connector arrangement, component placement, and hardware revision.
For accurate replacement-part selection, the most useful identification details include the Candela laser model and the markings printed on the existing PCB.
Photographs of the original board and its connectors can also help distinguish between similar components.
Levant Technology can provide available product information and assist with enquiries involving compatible Mini Series handpiece assemblies.
Handpiece Bubble Sensor Board Mini Series should be installed by qualified laser service personnel.
Professional servicing includes inspecting the handpiece assembly, checking relevant electronic connections, and installing the correct replacement component.
Following replacement, the technician should complete the equipment checks required by the manufacturer’s service procedures.
Proper maintenance helps preserve the intended operation of the handpiece sensing and monitoring system.
What is Handpiece Bubble Sensor Board Mini Series?
It is a specialized electronic replacement PCB associated with sensing and monitoring functions in compatible Candela Mini Series laser handpieces.
Which Candela machines are associated with this board?
Related board configurations are used in Candela Mini GentleLase (MGL) and Mini GentleYAG (MGY) equipment.
What is the main purpose of the board?
It is associated with bubble-related detection within the compatible laser handpiece sensing system.
Does this board detect treatment spot size?
Certain related Mini Series handpiece boards are also associated with spot-size detection. The exact functions depend on the PCB configuration.
Is this a complete laser handpiece?
No. It is an electronic replacement board, not a complete handpiece or laser machine.
Is it the same as a slider sensor PCB?
Not necessarily. The correct replacement depends on the installed handpiece electronics and board design.
Can this PCB be used in GentleMax Pro?
The product is associated with Mini Series equipment. Compatibility with later Pro platforms is not established by the product name.
Does replacing the board solve every handpiece error?
Different equipment faults can have different causes. A matching board is used when technical diagnosis identifies the corresponding component.
Who should install the replacement PCB?
Installation should be performed by a qualified laser service technician.
Where can I order Handpiece Bubble Sensor Board Mini Series in the UAE?
Levant Technology handles enquiries for professional Candela handpiece electronic boards and laser spare parts in the UAE.
Looking for a Handpiece Bubble Sensor Board Mini Series for your Candela laser equipment?
Levant Technology supplies professional laser handpiece PCBs, electronic sensor boards, optical components, cooling accessories, and replacement spare parts for aesthetic clinics and laser service professionals throughout the UAE.
Our team can assist with board identification, available product configurations, pricing, and ordering information.
Explore our laser spare parts collection for additional Candela Mini Series electronics, handpiece components, and professional laser equipment accessories.
Interested in Handpiece Bubble Sensor Board Mini Series? Contact Levant Technology on WhatsApp for pricing, availability, and orders.
AED 300,00
AED 15.000,00
AED 1.100,00
AED 3.000,00
AED 1.500,00
AED 4.000,00
AED 825,00
AED 1.320,00
Write a Review